banner

Torque Converter
TS-2700 with Display

Photo (TS-2700 Torque Converter with Display)

The TS-2700 is the latest type of torque converter Despite compact designed body, it can provide a variety of functions on torque signal processing and signal outputs. Measurement results of torque and revolution can be directly read out on the display, furthermore, offers high accuracy (±0.2 % FS of rated range of torque detector) and repeatability. For outputs, 3 ways of outputs are available to use, analog voltage, BCD or RS-232C interface, its selection can expand capability of connection with external equipment such as a pen recorder, a sequencer, or a CPU.

Features

  • Compact and lightweight

  • Both torque and revolution measurement and direct read-out on the display

  • 3 ways of signal output, analog voltage, BCD or RS-232C interface

  • High accurate measurement for torque at ±0.2 % FS, for revolution at ±0.02 % FS

  • N-0 compensation function provided (zero value compensation for torque data over the revolution range)

  • Remote function enables following functions externally, selection of revolution direction, change of selection updating time of BCD output, synchronized operation of two of TS-2700, provision of interlock using output of READY and so on.

  • Setup conditions in both of CW/CCW can be stored on internal nonvolatile memory.

Specifications

Torque Signal Measurement Section Input Section Type Phase-differential type torque detectors
Setup Section Zero value memory each for CW and CCW, with auto zero function
N-0 compensation 5 points each for CW and CCW
Selection of zero value CW, CCW, EXT
Indication of decimal point automatic
Display Section Indicator Green LED, 7-segment
Display range 0 to ±9999
Display unit Nm
Display updating interval 1s/10s/EXT, selectable
Accuracy (averaged for a second) ±0.2 % FS ±1 count (when 0-compensation provided)
±0.5 % FS ±1 count (when 0-compensation not provided)
Revolution Signal Measurement Section Input Section REV
IN		 Type Signal from electromagnetic detector model MP-981
Frequency 1 Hz to 100 kHz
(accuracy is guaranteed from 10 Hz or higher)
INT SIG2 of torque detector
Setup Section No. of input pulse 1 to 9999 P/R
Display Section Indicator Green LED, 7-segment
Display range 0 to 99999
Display unit r/min
Display updating interval 1s/10s/EXT, selectable
Accuracy (averaged for a second) ±0.02 % FS ±1 count
Output Section Analog Voltage Output Section Torque output level 0 to ±10V/FS
Revolution output level 0 to +10V/FS
Time constant Torque : 500ms/63ms
Rev.     : 63ms
Linearity Torque : ±0.2 % FS (when N-0 compensation provided)
Rev.     : ±0.1 % FS
Isolation Withstanding pressure of 250VDC for one minute
Common is used for torque and revolution
Proper Resistance 10kΩ or more
Connector CO2 (BNC) plug
Digital Output Section Configuration BCD
Updating output every 1 second
Connector DX40-50P
RS-232C Baud rate 9600bps
Data 0-point/N-0 compensation/input of setup conditions, measurement values/output of setup conditions
Connecting cable AX-5022 RS-232C interface cable
Remote Function Input selection of revolution direction of CW/CCW, input of clear, input of trigger
Output output of trigger, output of ready
General Power supply 100 to 240VAC, 50/60 Hz
Power consumption approx. 25VA (at 100VAC)
Insulation resistance 10MΩ or more (at DC500V)
Withstanding voltage AC1500V for one minute
Operating temperature 0 to +40°C
Storage temperature -10 to +55°C
Outer dimensions 76 (W) x 142 (H) x 321 (D) mm
Weight Approx. 1.8 kg

Back To Products

copyright