banner

Digital Torque Meter
TS-3200

Photo (TS-3200 Digital Torque Meter)

With large sized LCD featured on the TS-3200,
it may offer easy view of measuring results for an operator.
Display item on main display can be chosen as what an user wants to see, among torque, revolution and power, furthermore, max. 7 items, max. value, min. value, peak to peak value, ripple ratio, can be displayed one time,
using sub display function combined with main display, easy setup operation can be realized through key input on the panel.
In addition, the TS-3200 provides a variety of interface, including which is sold as optional function, such as remote input/output for control, analogue output, BCD output, comparator, LAN, RS-232C, and GP-IB.
It may expand possibility of data communication with external equipment for control
and data processing.

Features

  • Large sized LCD

  • N-0 torque value compensation function provided so that it can ensure high accurate measurement
    for torque at ±0.2 % FS.

  • A variety of interface for control and data communication can be provided.
    Standard input / output functions are analogue output and remote control input / output.
    Comparator output, BCD output, LAN interface, RS-232C interface and GP-IB interface can be chosen
    as optional function.
    (one kind of optional output or interface should be chosen exclusively.)

Specifications

Torque Measurement Section Input Section Input signal

Phase-differential type torque detectors
Connector

TRC116-12A10-7M10.5 or
CO2 (BNC) plug x 2 (not available to use at same time)

Condition Setup Section Capacity ±1 to 9999
Factor 1 to 65535
Unit mNm, Nm, kNm
Zero compensation 1 point each for CW & CCW
manual or automatic operation
N-0 compensation 10 points each for CW & CCW
manual or automatic operation
Rotational direction CW, CCW, EXT
Response Time constant can be settable among;
16ms/31ms/63ms/125ms/250ms/500ms/1s/2s/4s/8s/16s/32s/64s
Display Section Digit polarity + 4-digit or 5-digit, selectable
Display updating 1s to 10s (settable, at 1s step) or timing of external input signal
Accuracy with N-0 compensation ±0.2 % / FS ±1 count
(when 4-digit display, at 1s updating)
without N-0 compensation ±0.5 % / FS ±1 count
(when 4-digit display, at 1s updating)
Output Section Analog output Voltage signal, 0±10V / F.S
Scale Settable at 0.1V step for 0.1 to 10V
Response 16ms to 64s
specified by time constant
Accuracy with N-0 compensation ±0.2 % / FS (averaged value for one second)
without N-0 compensation ±0.5 % / FS (averaged value for one second)
Temperature drift ±0.01 % / FS / °C
Connector CO2 (BNC) plug
Revolution Measurement Section Input Section REVO1 Type

Sine wave input
(ex., MP-910 magnetic detector)
Input Impedance 10Ω min.
Frequency 10 Hz to 100 kHz
Amplitude 0.2 to 45 Vrms
Connector CO2 (BNC) plug
REVO2 Type

Square wave input
(ex., MP-981 electromagnetic detector)
Input Impedance 10Ω min.
Frequency 1 Hz to 200 kHz
Amplitude Hi : +4 to +30V, Lo : +0.6Vmax
pulse width : 2us min
Power Supply DC 12V, 100mA
(for electromagnetic detector)
Connector CO2 (BNC) plug
INT Type SIG2 input of torque signal
Condition Setup Section Unit r/min, r/s, Hz
Pulse Selection of
Signal Input from Rev. pickup		 1 to 99999 P/R
Gear Ration ±1 to 9999/1 to 9999
available to display at revolution before change of speed
Offset ±1 to 9999
only available when r/min unit is selected
Measured value = actual measured value - off set value
Response Time constant can be settable among;
16ms/31ms/63ms/125ms/250ms/500ms/1s/2s/4s/8s/16s/32s/64s
Display Section Digit 5-digit
Display resolution 0.001/0.01/0.1/1, available to select through capacity (full scale) setup
Display updating 1s to 10s (settable, at 1s step) or timing of external input signal (same as torque section)
Accuracy ±0.05 % / FS ±1 count (at 1s updating)
Output Section Analog output Voltage signal, 0±10V / F.S
Scale Settable at 0.1V step for 0.1 to 10V
Response 16ms to 64s
specified by time constant
Accuracy (averaged value for one second) ±0.1 % / FS
Temperature drift ±0.01 % / FS / °C
Connector CO2 (BNC) plug
Output/Power Calculation Section Power Calculation Output power (W) =  torque (Nm) x rev. speed (r/min) x 2π/60
1 PS = 0.7355 kW
Display Section Digit polarity + 5-digit
Display updating 1s to 10s (settable, at 1s step) or timing of external input signal (same as torque section)
Unit mW, W, kW, PS
Accuracy Accuracy of torque display + accuracy of revolution display
Output Section Analog output Voltage signal, 0±10V / F.S
Scale Settable at 0.1V step for 0.1 to 10V
Response 16ms to 64s
specified by time constant
Accuracy Accuracy of torque display + accuracy of revolution display
Temperature drift ±0.01 % / FS / °C
Connector CO2 (BNC) plug
Display Panel LCD 320 x 240 dots
Backlight ON/OFF, selectable
Main Single/Dual/Triple display, selectable among torque, revolution, power (output)
Sub Can be combined with Main Display function peak values (MAX/MINI/P-P),
ripple ratio
Status READY, CLEAR, TRQ IN, REV IN, CW/CCW, CMP OUT ON/OFF
Interface Section Remote Control Clear Input Contact input display and output is forced to be zero(0) when contact is closed.
Revolution Direction Input Contact input selection of torque zero point at CW/CCW
CCW selected when contact is closed.
Trigger Input Contact input
Status of display and BCD is updated by contact being closed when external gate activated, or by pressing a switch on the panel when trigger function activate.
Trigger Output Contact output
synchronized with gate timing ex. when 1s gate, 0.5s on / 0.5s off
Ready Output Contact output
contact closed when TS-3200 under torque measurement
Input Section Type Dry contact input
Contact Input Voltage : 5.25V max.
Current : 1mA max.
Voltage Input Hi level : +4 to +5.25V
Lo level : 0 to +1V
Output Section Type Photo-MOS relay
Withstand voltage DC30V max.
Withstand current 100mA max.
Resistor (ON) 10Ω max
Resistor (OFF) 500kΩ min.
Connector R03-PB8M
Analogue Voltage Output No. of output channel No. of output channel
Parameter 2 items can be selected among torque, revolution or power
Connector CO2 (BNC) plug
Specification See descriptions of "Output Section" for each measuring parameter
Comparator Output
opt. TS-0322		 No. of output channel 2 channels
Parameter Upper or lower of torque, revolution or power (output)
Output updating Settable between 0.004 to 10s or external
Comparison Activated by averaged value in setup time
Output method Same as function of Output Section in Remote Control
Connector RM12BPG-4S
BCD Output
opt. TS-0323		 No. of output channel 2 channels
Parameter Selectable among torque, revolution or power
Output updating at gate timing between 0.1 to 10s or external, or at every sampling time
Output method Positive logic open collector output
Connector 57-30500 (DDK) amphenol full pitch with 50-pin
LAN
opt. TS-0324		 Bit rate 100Mbps/10Mbps
automatic selection
Transmission 100BASE-TX/10BASE-T
Connector type RJ-45 (applied to category 5)
Network Protocol TCP/IP
TCP/IP Application supporting only for socket through protocol
RS-232C
opt. TS-0325		 Standard complied to EIA and JISX5101
Baud rate 1200/2400/4800/9600/19200 bps
Connector D-sub 9-pin, female
GP-IB
opt. TS-0326		 Standard complied to IEEE488-1978
General Power Supply AC100 to 240V ±10 % 50/60 Hz
Power Consumption 35VA max.
Insulation Resistor 10MΩ min. at DC500V
Withstanding Voltage AC1500V for 1 min.
Operating Temperature 0 to +40°C
Storage Temperature -10 to +55°C
Outer dimensions approx. 376 (W) x 114 (H) x 317.2 (D) mm
Weight Approx. 5 kg

Remarks

  1. Option TS-0324, 0325 or 0326 should be exclusively installed on the TS-3200 Digital Torque
    Meter. Only one kind of option among them can be available to install.
  2. Time constant of analogue output, in case of MD or SS-series torque detectors being used
    in combination, should be set at 63ms or faster

Back To Products

 
copyright